Plantronics WO100 User Guide - Page 10
Lifter Set Up Optional
View all Plantronics WO100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5 Lifter Set Up (Optional) 5.1 Installing Lifter 7 Gently place the lifter on the desk phone in the predetermined position. 8 Press firmly to adhere. Handset Lifter Power Cord 1 Firmly press the handset lifter power cord into the handset lifter jack. 2 While wearing your headset, slide the handset lifter arm under the handset until the lifter base touches the side of the phone. 3 Slide the lifter up to where it nearly touches the handset earpiece. 5.2 If You Do Not Hear a Dial Tone 1 If you do not hear a dial tone, raise the lifter height switch to the next highest position. 4 Press the call control button on your headset to activate the lifter. 5 If you hear a dial tone the lifter is set correctly and needs no adjustment. 6 Remove the protective strips from the 3 mounting tapes on the underside of the lifter. 2 Repeat steps 2 through 5 in Section 5.1 as necessary until you hear a dial tone. 3 When you hear a dial tone, secure the lifter as described in steps 6 though 8. Plantronics Savi User Guide 10