Plantronics WO100 User Guide - Page 9
Configure and Test Call
View all Plantronics WO100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 Configure and Test Call 4.1 Checking Configuration 1 If your desk phone has a volume control set it to midrange. 2 On the base, ensure the Configuration Switch is set to "A" and the Desk Phone Speaking Volume and Desk Phone Listening Volume are both set to 3. 7 If the dial tone still does not sound clear, adjust the Configuration Switch until the dial tone sounds the best. Note Multiple settings might work with your phone; however, only one is the optimal position. 8 Press the call control button on the headset to complete configuration. 9 Replace the handset into the desk phone cradle. Desk Phone Speaking Volume Configuration Switch Desk Phone Listening Volume NOTE For most phones, these factory default settings will sound the best. 3 With your headset on, press the call control button on the headset. 4 Remove the handset from desk phone cradle. 5 Listen for a dial tone. If the dial tone sounds clear, press the call control button on headset and continue with Step 4.2 Making a Test Call with Desk Phone. 6 If the dial tone is too loud or too soft, adjust the headset volume by pushing the call control button up to increase the volume or down to decrease the volume. 4.2 Making a Test Call with Desk Phone 1 If your desk phone has a volume control, ensure it is set it to mid-range. 2. With your headset on, press the call control button on the headset. 3 Remove the handset from desk phone cradle. 4 Dial the number using your desk phone. 5 If the listening volume is too loud or too soft, adjust the listening volume on the headset by pushing the call control button up to increase the volume and pushing down to decrease the volume. 6 If the listening volume is still too loud or too soft adjust the Desk Phone Listening Volume on the base. A setting that is too high can produce an uncomfortable echo for you. 7 If the speaking volume is too loud or too soft for your listener, adjust the Desk Phone Speaking Volume on the base to the best setting for your listener. A setting that is too high can produce an uncomfortable echo for you and a distorted sound for you listener. 8 Press the call control button on the headset to end the test call. 9 Replace the handset into the desk phone cradle. NOTE Do not press the call control button in when adjusting the volume otherwise the call can be ended accidentally. For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit: www.plantronics.com/healthandsafety. Plantronics Savi User Guide 9