ProForm 400 H Elliptical English Manual - Page 7
Attach a Pedal 19 to the Left Pedal Arm 21
View all ProForm 400 H Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Identify the Ramp Axle (74), which is longer than the Pivot Axle (not shown). Apply a generous amount of the included grease to the Ramp Axle. Have a second person hold the Ramp (78) near the Frame (1) in the position shown. Insert the Ramp Axle (74) through the Ramp and the Frame. Tighten an M8 x 25mm Patch Screw (70), with an M8 Washer (64) and a Ramp Cover (59), into each end of the Ramp Axle. Next, pull the Ramp Pin (90) and align the Ramp (78) with one of the three holes in the Frame (1). Then, release the Ramp Pin into the Frame. Make sure that the Ramp Pin is firmly engaged in the Frame. 3 64 70 90 74 59 Grease 78 64 70 59 1 4. Identify the Left Pedal Arm (21), which is 4 marked with a "Left" sticker. Attach a Pedal (19) to the Left Pedal Arm (21) with three M4 x 19mm Screws (68) and three Star Washers (85). Repeat this step for the Right Pedal Arm (not shown). 19 21 85 85 68 7