ProForm 400 H Elliptical English Manual - Page 9
Attach the Water Bottle Holder 17 to
 |
View all ProForm 400 H Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Have a second person hold the Upright (2) 7 near the Frame (1) as shown. Next, connect the Upper Wire Harness (18) to the Lower Wire Harness (38). Attach the Upright (2) to the Frame (1) with two M8 x 69mm Button Bolts (91), two M8 Split Washers (93), and two M8 Nylon Locknuts (87). Be careful to avoid pinching the wires. 2 Avoid pinching the Wire Harnesses during this step 18 87 38 1 93 91 8. Attach the Water Bottle Holder (17) to the 8 Upright (2) with two M4 x 22mm Screws (66). 17 2 66 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
9
8
8.
Attach the Water Bottle Holder (17) to the
Upright (2) with two M4 x 22mm Screws (66).
7
7.
Have a second person hold the Upright (2)
near the Frame (1) as shown. Next, connect
the Upper Wire Harness (18) to the Lower
Wire Harness (38).
Attach the Upright (2) to the Frame (1) with
two M8 x 69mm Button Bolts (91), two M8
Split Washers (93), and two M8 Nylon
Locknuts (87).
Be careful to avoid pinching
the wires.
2
38
18
1
93
2
17
66
91
Avoid pinching the
Wire Harnesses
during this step
87