ProForm 475 Audio Series Treadmill Uk Manual - Page 11

12.Pivot the cylinder end of the Gas Spring (21) down to the position shown. Remove the Spring Clip (105) from the end of the Gas Spring. Next, align the cylinder end of the Gas Spring (21) with the bracket in the center of the Base (48). Press the end of the Gas Spring onto the ball on the bracket. Note: It may be necessary to pivot the Frame (not shown) forward or backward slightly to align the end of the Gas Spring with the ball. See drawing 12a. Insert the Spring Clip (105) into the two indicated small holes in the Gas Spring (21). Then, rotate the Spring Clip until it clips onto the Gas Spring. With the help of a second person, lower the Frame (not shown) to the floor. 12 48 105 12a 21 Bracket 21 48 105 Holes Bracket 13. Lower the Uprights (31, 36) as shown. 13 See the inset drawing. Push the Uprights (31, 36) sideways so that the treadmill Frame (74) is centered between the Uprights. Firmly tighten the Upright Bolts (40) and the Frame Bolts (32) on each side of the treadmill. Do not overtighten the Frame Bolts. 36 Side View 31, 36 32 40 View From Above 74 31 11