ProForm 475 Audio Series Treadmill Uk Manual - Page 20
Current Period column
View all ProForm 475 Audio Series Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
The speed setting for the first period will be Current Period shown in the flashing Current Period column of the matrix. (The in- cline settings are not shown in the matrix.) The speed settings for the next four periods will be shown in the columns to the right. When only three seconds remain in the first period of the program, both the Current Period column and the column to the right will flash and a series of tones will sound. If the speed and/or incline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you. When the first period is completed, all speed settings will move one column to the left. The speed setting for the second period will then be shown in the flashing Current Period column and the treadmill will automatically adjust to the speed and incline settings for the second period. Note: If all five of the indicators in the Current Period column are lit, the speed settings may move downward so that only the highest indicators appear in the matrix. The program will continue in this way until the speed setting for the last period is shown in the Current Period column and the last period ends. The walking belt will then slow to a stop. Important: The calorie goal is an estimate of the number of calories that you will burn during the program. The actual number of calories that you burn will depend on your weight. In addition, if you manually change the speed or incline of treadmill during the program, the number of calories you burn will be affected. If the speed or incline setting for the current period is too high or too low, you can manually override the setting by pressing the Speed or Incline buttons. Important: When the current period of the program ends, the treadmill will automatically adjust to the speed and incline settings for the next period. To stop the program at any time, press the Stop button. To restart the program, press the Start button or the Speed increase button. The walking belt will begin to move at 2 Km/H. When the next period of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next period. 5 Follow your progress with the displays. See step 6 on page 17. 6 Measure your heart rate if desired. See step 7 on page 17. 7 When you are finished exercising, remove the key from the console. See step 8 on page 17. 20