ProForm 510 Es Elliptical English Manual - Page 11

9. The Console (7) can use four D batteries (not included); alkaline batteries are recommended. 9 Do not use old and new batteries together or alkaline, standard, and rechargeable batter- ies together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before you insert batteries. Otherwise, you may dam- age the console displays or other electronic components. Remove the screws and the battery covers, insert batteries into the battery compartments, and then reattach the battery covers. Make sure to orient the batteries as shown by the diagrams inside the battery compartments. To purchase an optional power adapter, call the telephone number on the cover of this manual. To avoid damaging the console, use only a regulated manufacturer-supplied power adapter. Plug one end of the power adapter into the receptacle inside the indicated battery compartment; route the power adapter through the notch in the battery cover. Then, plug the other end into an outlet installed in accordance with all local codes and ordinances. Battery Covers Screws Notch 7 Receptacle 10. Untie and discard the wire tie on the Upper Wire (110). While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Upper Wire (110) and to the Pulse Sensor Wires (63). Insert the excess wire into the Upright (4). 10 7 63 110 4 11