ProForm 510 Es Elliptical English Manual - Page 21
How To Use An 8-week Weight-loss
View all ProForm 510 Es Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
HOW TO USE AN 8-WEEK WEIGHT-LOSS WORKOUT 1. Turn on the console. Press any button or begin pedaling to turn on the console. 2. Select the desired week of the program. During the workout, the workout profile will show your progress. The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the resistance level for the current segment. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. To select the desired week of the program, press the Select Week button repeatedly until the number of the desired week appears in the display. The resistance level for the next segment will appear in the center display for a few seconds to alert you. The resistance of the pedals will then change. The target speed for the next segment will appear in the right display for a few seconds to alert you. Week Number 3. Select the desired day of the program. There are three day workouts for each week of the program. To select the desired day of the program, press the Select Day button repeatedly until the number of the desired day appears in the display. Day Number As you exercise, keep your pedaling speed near the target speed for the current segment. IMPORTANT: The target speed is intended only to provide motivation. Your actual pedaling speed may be slower than the target speed. Make sure to pedal at a speed that is comfortable for you. If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Digital Resistance buttons. IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment. Then, the duration of the workout will appear in the left display and a profile of the resistance levels of the workout will scroll across the center display. If you stop pedaling for several seconds, a series of tones will sound and the workout will pause. To restart the workout, simply resume pedaling. The workout will continue until the last segment of the profile flashes and the last segment of the workout ends. Profile 5. Follow your progress with the display. See step 4 on page 19. 4. Start the workout. 6. Measure your heart rate if desired. Press the Go button and begin pedaling to start the workout. Each workout is divided into one-minute segments. One resistance level and one target speed are programmed for each segment. Note: The same resistance level and/or target speed may be programmed for consecutive segments. See step 5 on page 20. 7. Turn on the fan if desired. See step 6 on page 20. 8. When you are finished exercising, the console will turn off automatically. See step 7 on page 20. 21