ProForm 510 Es Elliptical English Manual - Page 9
Tip: To prevent the Upper Wire 110
View all ProForm 510 Es Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). 5 See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie to the Upper Wire (110). Then, pull the upper end of the wire tie until the Upper Wire is routed through the Upright. 4 Tip: To prevent the Upper Wire (110) from 110 falling into the Upright (4), secure the Upper Wire with the wire tie. Wire Tie 1 Wire Tie 110 6. Tip: Avoid pinching the Upper Wire (110). Avoid damaging the indicated plastic tabs. Set the Upright (4) on the Frame (1). Attach the Upright (4) with four M10 x 25mm Screws (92) and four M10 Split Washers (105). 6 Avoid pinching the Upper Wire (110) and avoid damaging the tabs 110 92 105 Tabs 4 92 105 1 9