ProForm 650 English Manual - Page 10
Attach the Left Press/Fly Arm 49 to the Press
View all ProForm 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
13. Attach the Leg Lever Lock (11) to the front leg of 13 the Base (8) with a 5/16" x 3" Bolt (78), three 5/16" Washers (80), and a 5/16" Nylon Locknut (81). Do not overtighten the Nylon Locknut; the Leg Lever Lock must pivot easily. Front Leg 8 80 78 11 14. Press two 2" Square Inner Caps (33) into the top 14 of the Press Frame (12). Press two 3/4" x 1/2" Flange Bushings (18) into the Main Upright (3). Remove the 3/8" x 9" Bolt (51), the two 3/8" USS Washers (104), and the 3/8" Nylon Locknut (50) from the Press Frame (12). Lubricate the Bolt with grease. Attach the Press Frame to the Main Upright (3) with the Bolt, Washers, and Locknut. Do not overtighten the Bolt and Locknut; the Press Frame must be able to pivot easily. 80 81 33 3 50 104 18 Lubricate 104 51 12 15. Lubricate the flat surfaces of the four Large Bushings (48). Attach the Left Press/Fly Arm (49) to the Press Frame (12) with a 3/8" x 3" Carriage Bolt (64) and a 3/8" Nylon Jamnut (63). Make sure to attach the Left Press/Fly Arm on the correct side by noting the position of the tab. Press a 2" Round Inner Cap (57) and a 1" Round Inner Cap (103) into the Left Press/Fly Arm (49). Wet the handle on the Left Press/Fly Arm (49) with soapy water. Slide an Arm Grip (58) onto the handle. Insert an Adjustment Pin (20) into the Press Frame (12) and the hole in the tab on the Left Press/Fly Arm (49). Repeat this step with the Right Press/Fly Arm (46). 15 20 46 20 12 Lubricate 64 48 63 Tab 49 Handle 103 58 57 10