ProForm 650 English Manual - Page 9
Arm Assembly
View all ProForm 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Arm Assembly 9 9. Open the parts bags labeled "ARM ASSEMBLY." Attach the Rear and Forward Leg Press Uprights (97, 98) to the Leg Press Base (84) with two 3/8" x 3 1/4" Bolts (87) and two 3/8" Nylon Locknuts (50). Note: The Rear Leg Press Upright (97) has an extra hole in it. Press two 2" Square Inner Caps (33) into the Rear and Forward Leg Press Uprights (97, 98). 10. Attach the two Leg Press Attachments (100) to 10 the Rear and Forward Leg Press Uprights (97, 98) with two 3/8" x 3 1/4" Bolts (87) and two 3/8" Nylon Jamnuts (63). 33 97 98 50 84 87 97 100 63 87 100 98 11. Attach the Leg Press Plate (85) to the Leg Press Attachments (100) with two 3/8" x 3 1/4" Bolts (87), eight 3/8" Washers (55), and two 3/8" Nylon Jamnuts (63). Note: All eight of the 3/8" Washers (55) must be between the Leg Press Attachments (100) and the welded tube on the Leg Press Plate (85). 12. Attach a Handle (95) to the Sliding Seat Frame (74) with two 1/4" x 1 1/2" Bolts (101) and two 1/4" Nylon Locknuts (25). Attach the other Handle (95) in the same manner. 11 100 85 87 12 74 87 55 55 55 63 95 101 25 95 9