RCA CC4352 User Guide - Page 51
Playback on TV Without Audio/Video Inputs
UPC - 034909820223
View all RCA CC4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Playback Playback on TV Without Audio/Video Inputs To connect your camcorder to a TV without audio/video inputs, you need an optional CRF95 RF output adapter and an optional coaxial RF cable, such as VH82 or VH90 shown on page 52. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages 46-47. Playback on a TV/VCR Without A/V Jacks Antenna OR Antenna Back of TV OR Optional 300/75 ohm Transformer VHF OR Channel Selector IN FROM VHF Optional 75-300 Ohm ANT Transformer (such as VH54 Optional Coaxial RF Cable OUT (such as VH82 or VH90) TO TV Optional RF Output Adapter (such as CRF95) Installation 1. Disconnect the VHF antenna from your TV. Connect the antenna to the IN FROM ANT connector on the RF output adapter if you are going to leave the adapter connected to the TV. Note: If your VHF antenna is the flat twin-lead type attached by two screws, you need an optional 300/75 ohm transformer. 2. Attach one end of the optional coaxial RF cable to the OUT TO TV connector on the adapter, and attach the other end to the VHF input on your TV as shown. Note: If your TV has 300 ohm screw terminals, you need a 75/300 ohm transformer, such as VH54, shown on page 53. 3. Attach the RF output adapter's yellow plug to the VIDEO jack, the small plug to the RF DC OUT jack, and the white plug to the AUDIO jack located under the small cover on the side of the camcorder. 48