RCA L32HD32D User Guide & Warranty - Page 18

3 Press ▲ or ▼ to select "Ch Label", then press ▶ or ENTER. The "Ch Label" menu will appear. 4 Press ◀ or ▶ to select a channel you want to label, then press ▼. Ch Label Channel Number Ch Label Label Clear 15-1 >> : Select : Adjust 5 Press ◀ or ▶ repeatedly until the character you want appears in the first space. Ch Label Channel Number Ch Label Label Clear 15-1 A >> : Select : Adjust ENTER:Set The characters rotation as follows: SPACE If the character which you desire appears, press ENTER. Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters. 6 When you finish inputting the label name, press EXIT/CANCEL to return to the normal screen. 7 Repeat steps 4-5 for other channel.You can assign a label to each channel. To clear a Ch Label After step 4 above, press ▲ or ▼ to select "Label Clear", then press ▶ or ENTER. NOTE: • The channel labels will be reset after "Automatic Search" on page 15. Labeling video inputs The Video Label feature allows you to label each input source for your TV. 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press ▲ or ▼ to select "Setup", then press ▶ or ENTER. 3 Press ▲ or ▼ to select "Video Label", then press ▶ or ENTER. 4 Press ▲ or ▼ to select an input which you want to label. 5 Press ◀ or ▶ to select the desired label for that input source. 18 Video Label Video - Component - HDMI - : Select : Adjust - VCR DVD DTV SAT CBL HD : Uses the default label name : Video cassette recorder : DVD video : Digital TV set-top box : Satellite box : Cable box : HDMI device (only for HDMI inputs) 6 Press EXIT/CANCEL to return to the normal screen. Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to "TV Rating" and "Movie Rating" if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register a password 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press ▲ or ▼ to select "Lock", then press ▶ or ENTER. 3 Select and enter your password (4 digits) using Number buttons (0-9), then press ENTER. Lock New Password * * *_ [0-9] : Select ENTER:Set " " appears instead of the number. 4 Enter the same password again to confirm, then press ENTER. The password is now registered. NOTE: • If you forget your password, you can reset it. Turn the volume all the way down using VOLUME - on the TV. Continue holding the button and press 0 on the remote control at the same time for about 5 seconds. Enter a new password. • To avoid forgetting the password, write it down and keep in a safe place. To set the V-Chip 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press ▲ or ▼ to select "Lock" menu, then press ▶ or ENTER. 3 Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear. 51H0101A_eng.indd 18 2/26/08 9:47:40 AM