RCA L32HD32D User Guide & Warranty - Page 37
Connections to other equipment, continued - tv sound but no picture
UPC - 846042700641
View all RCA L32HD32D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear of the unit To PC/DVI AUDIO IN To HDMI/DVI IN To HDMI out HDMI cable (type A connector) (not supplied) HDMI - to - DVI adapter cable (HDMI type A connector) or (not supplied) HDMI device DVI device Audio cord (not supplied) To DVI output NOTE: • When using HDMI/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see "Selecting the HDMI audio input source" on page 24). Otherwise you will only see the image with no sound. • If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component. Should you require further instruction, please contact the manufacturer of the external component. Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below. Rear of the unit Coaxial Digital Audio Output Front Speaker (Left) Subwoofer TV/DVD Front Speaker (Right) Coaxial digital cable (not supplied) To Coaxial Digital Audio Input Center Speaker AV Amplifier with built-in digital surround decoder as listed above Surround Speaker (Left) Surround Speaker (Right) NOTE: • This unit will not work in conjunction with DTS audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder. • Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog broadcasting. 37 51H0101A_eng.indd 37 2/26/08 9:47:55 AM