Reebok Crosswalk V 7.9 Treadmill English Manual - Page 13
Lower the Frame 53 see HOW TO LOWER
View all Reebok Crosswalk V 7.9 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
14. Raise the Frame (53) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (50) so that the large barrel and the Latch Knob (51) are in the positions shown. Remove the tie from the upper end of the Storage Latch (50). Attach the upper end of the Storage Latch to the bracket on the Frame (53) with a 3/8" x 2" Bolt (3) and a 3/8" Locknut (11). Remove the tie from the lower end of the Storage Latch (50). Keep the holes in the Latch Cap (49) aligned with the holes in the Storage Latch. Make sure to keep the Latch Cap inside the Storage Latch. Attach the Storage Latch to the bracket on the Base (60) with a 3/8" x 1 3/4" Bolt (8). Note: It may be necessary to move the Frame (53) back and forth to align the Storage Latch with the bracket. Lower the Frame (53) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 14 11 50 51 53 3 Large Barrel 60 49 8 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24). 13