Reebok Crosswalk V 7.9 Treadmill English Manual - Page 24

24

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a.

If the walking belt is off-center,

first remove the

key and

UNPLUG THE POWER CORD. If the

walking belt has shifted to the left,

use the hex

key to turn the left idler roller bolt clockwise 1/2 of a

turn;

if the walking belt has shifted to the right,

turn the bolt counterclockwise 1/2 of a turn. Be

careful not to overtighten the walking belt. Then,

plug in the power cord, insert the key, and run the

treadmill for a few minutes. Repeat until the walk-

ing belt is centered.

b.

If the walking belt slips when walked on,

first re-

move the key and

UNPLUG THE POWER CORD.

Using the hex key, turn both idler roller bolts clock-

wise, 1/4 of a turn. When the walking belt is cor-

rectly tightened, you should be able to lift each

edge of the walking belt 2 to 3 in. (5 to 7 cm) off

the walking platform. Be careful to keep the walk-

ing belt centered. Then, plug in the power cord, in-

sert the key, and carefully walk on the treadmill for

a few minutes. Repeat until the walking belt is

properly tightened.

PROBLEM: The crosswalk arms squeak during use

SOLUTION:

a. (Note: Correcting this problem requires a small

amount of white marine grease, available at hard-

ware stores.) Turn the Resistance Knob (110)

counterclockwise and remove it. Next, remove the

Resistance Cone (108) with the Crosswalk Arm

(98).

Apply a

thin layer

of white marine grease to the

outer surface of the Resistance Cone (108). Then,

reattach the Resistance Cone with the Crosswalk

Arm (98) and the Resistance Knob (110).

a

b

110

98

108

a

Reebok Crosswalk V 7.9 Treadmill English Manual - Page 24

Unplug The Power Cord. If

Page 24 highlights