Reebok Crosswalk V 7.9 Treadmill English Manual - Page 7
Make sure that the power cord is unplugged.
View all Reebok Crosswalk V 7.9 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Cut the shipping tie securing the Upright Wire (86) to the Base (60). Locate a tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach two Base Feet (88) to the Base (60) in the locations shown with two #8 x 1" Tek Screws (2) and two Base Foot Spacers (89). Then, attach two Base Feet (88) with two #8 x 1" Tek Screws (2). 1 B 86 89 53 88 2 89 88 2 A Hole 60 88 2 88 2 2. Attach a Wheel (90) to the Base (60) with a 3/8" x 2" Bolt (3) and a 3/8" Locknut (11). Do not 2 overtighten the Locknut; the Wheel must turn freely. See the inset drawing. Cut the plastic tie near the Upright Wire (86). 60 3 90 11 Cut 86 7