Reebok Trainer Rx 3.5 Bike English Manual - Page 7

3. Slide the Shield Cover (5) upward onto the Upright (4). 3 Have a second person hold the Shield Cover (5) around the Upright (4) until you complete step 4. Tip: Avoid pinching the wires inside the Frame (1). Slide the Upright (4) onto the Frame. Attach the Upright (4) with five M8 x 16mm Screws (60) and five M8 Split Washers (61). 5 Avoid pinching the wires 4 60 61 61 60 61 60 1 4. Locate the two wire ties inside the Upright (4). Next, locate the Main Wire Harness (89) and the Upper Wire Harness (41) inside the Frame (1). Tie the lower end of one wire tie to the Main Wire Harness (89). Tie the lower end of the other wire tie to the Upper Wire Harness (41). Next, pull the upper end of the first wire tie upward until the Main Wire Harness (89) is routed through the Upright (4). Then, pull the upper end of the other wire tie upward until the Upper Wire Harness (41) is routed through the Upright. Then, slide the Shield Cover (5) downward and press it onto the Right and Left Front Shields (21, 22). 4 Wire Ties 22 5 Wire Ties 41 4 89 1 21 7