Reebok Trainer Rx 3.5 Bike English Manual - Page 8

Make sure that the Main Wire Harness 89

Get Reebok Trainer Rx 3.5 Bike PDF manuals and user guides View all Reebok Trainer Rx 3.5 Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

5. Make sure that the Main Wire Harness (89) and the Upper Wire Harness (41) are in the location shown. Using a small plastic bag to keep your fingers clean, apply a coat of the included grease to an M6 x 70mm Bolt Set (67). Tip: Avoid pinching the wires. Attach the Handlebar (6) to the Upright (4) with the M6 x 70mm Bolt Set (67) and two M8 Washers (70). Then, attach an M6 x 60mm Bolt Set (68) through the bracket on the Handlebar (6). Make sure that the Bolt Set is inside the bracket. 5 67 70 68 Avoid pinching the wires 6 68 Bracket 70 Grease 67 41 89 4 6. Insert the Main Wire Harness (89) and the Upper Wire Harness (41) upward through the indicated 6 opening in the Handlebar (6). 6 41 89 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
8
5
6
6.
Insert the Main Wire Harness (89) and the Upper
Wire Harness (41) upward through the indicated
opening in the Handlebar (6).
6
6
4
70
70
67
41
89
67
5.
Make sure that the Main Wire Harness (89)
and the Upper Wire Harness (41) are in the
location shown.
Using a small plastic bag to keep your fingers
clean, apply a coat of the included grease to an
M6 x 70mm Bolt Set (67).
Tip: Avoid pinching the wires.
Attach the
Handlebar (6) to the Upright (4) with the M6 x
70mm Bolt Set (67) and two M8 Washers (70).
Then, attach an M6 x 60mm Bolt Set (68)
through the bracket on the Handlebar (6).
Make
sure that the Bolt Set is inside the bracket.
Avoid pinching
the wires
Grease
Bracket
68
68
89
41