Reebok Trainer Rx 3.5 Bike English Manual - Page 9

IMPORTANT: If the Console has

Page 9 highlights

7. The Console (7) can use four D batteries (not included); alkaline batteries are recommended. 7 Do not use old and new batteries together or alkaline, standard, and rechargeable batter- ies together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screw and the bat- tery cover, and insert batteries into the battery compartment; orient the batteries as shown by the diagram inside the battery compartment. Then, reattach the battery cover. To purchase an optional power adapter, call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power adapter. Plug one end of the power adapter into the receptacle on the back of the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screw Batteries 7 Battery Cover 8. While another person holds the Console (7) near the Handlebar (6), connect the wires on the Console to the Main Wire Harness (89) and the Upper Wire Harness (41). Insert the excess wire into the Upright (4) or into the Console (7). Tip: Avoid pinching the wires. Attach the Console (7) to the Handlebar (6) with four M4 x 16mm Screws (80). 8 7 6 80 41 4 89 Avoid pinching the wires 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

9
8.
While another person holds the Console (7)
near the Handlebar (6), connect the wires on the
Console to the Main Wire Harness (89) and the
Upper Wire Harness (41).
Insert the excess wire into the Upright (4) or into
the Console (7).
Tip: Avoid pinching the wires.
Attach the
Console (7) to the Handlebar (6) with four M4 x
16mm Screws (80).
7.
The Console (7) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the screw and the bat-
tery cover, and insert batteries into the battery
compartment;
orient the batteries as shown by
the diagram inside the battery compartment.
Then, reattach the battery cover.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console, use
only a manufacturer-supplied power adapter.
Plug one end of the power adapter into the
receptacle on the back of the console; plug the
other end into an outlet installed in accordance
with all local codes and ordinances.
8
7
7
6
41
89
80
Avoid pinching
the wires
4
Battery
Cover
Batteries
Screw
7