Ricoh 173573 R10 User Guide - Page 168

Changing the Operation Sound Setting (Operation Sounds) The following five operation sounds are made during camera operation. Start sound Shutter release sound Focus sound Beep sound LevelSound : Sound when the camera is turned on. : Sound when the shutter release button is pressed. : Sound when the shutter release button is half-pressed and the camera focuses on the subject. : Error sound indicating an operation that cannot be performed. : When [Level Setting] is set to [Sound] or [Disp + Snd] (GP.172), the sound is continually emitted at a set interval when the camera is level in shooting mode. Available Settings All *Default setting LevelSound Shutter Description All sounds on Only the level sound is emitted. Only the shutter sound and level sound are emitted. Note 5 If you try to perform an operation that cannot be performed, the beep sound is emitted regardless of the [Operation Sounds] setting. 1 Display the setup menu. • For the operating procedure, see P.154. 2 Press the ADJ./OK button " to select [Operation Sounds] and press the button $. 3 Press the button !" to select the desired setting. 4 Press the ADJ./OK button. Changing Camera Settings 166