Ricoh 173573 R10 User Guide - Page 203

7 Appendices Troubleshooting Error Messages If an error message is displayed on the screen, take the corresponding action. Error Message Cause and Action Refer to Insert Card No card is loaded. Insert a card. P.28 Set Date. The date is not set. Set the date. P.181 File Number Over Limit The file number limit has been exceeded. Use another card. P.179 Unmatched File The camera cannot display this file. Check the file contents on your computer, and then delete the file. Insufficient Memory. Continue? Because there is not sufficient capacity on the card, all the P.25 files cannot be copied. Use another card. Protected You are trying to delete a protected file. P.136 Card Is Write-Protected. The card is "Locked (write-protected)". Unlock the card. P.26 Print settings cannot be set for this This file (movie or other file) cannot be selected for printing. file. Insufficient Memory/Capacity Short Files cannot be stored. Make sure there is enough free space or delete unwanted files. P.56 P.156 P.157 The image print number limit has been exceeded. Select an P.151 image and set the number to 0. Format internal memory You must format the internal memory. P.157 Format card Card Error The card is not formatted. Format the card with this camera. P.156 Reformat the card. If, after doing so, the error message still P.156 7 appears, the card may be faulty. Do not use the card. Writing Data Writing file to memory. Wait until writing finishes. - No File There are no files that can be played back. - Cannot Record The number of remaining shots is 0. Switch to another card P.25 or the internal memory. No files to restore. There are no files to restore. P.144 Appendices 201