Ricoh 173573 R10 User Guide - Page 198

Downloading Images to Your Computer Caution • Do not force the USB cable into the terminal. • Do not apply excessive force with the USB cable connected. • When using the USB cable, do not move the camera with the USB cable. Downloading Images Without Using DL-10 You can download images from the camera to a computer without having to use software. 1 Make sure that the camera power is off. 2 Connect the accessory USB cable to a USB port of your computer. 3 Connect the USB cable to the USB terminal of your camera. • Your camera turns on. • Your computer automatically reads a Example of the display in file necessary for recognizing the Windows XP camera as a drive. • After this preparation, the camera is displayed as a drive under [My Computer]. 4 From the displayed drive, 6 copy a file to the desired location. • The figure at right shows the folder configuration in the drive. • When the contents of the internal memory are displayed, the drive name is [RICOHDCI]. 196 Example of the display in Windows XP Caution Do not turn off the camera or disconnect the USB cable during image transfer. • If a file with the same name already exists at the destination, it is overwritten. If you do not want the file to be overwritten, transfer data to another folder, or change the file name of the file at the destination. Note When an SD memory card is loaded, its files are displayed. Otherwise, files in the internal memory are displayed.