Ricoh 173573 R10 User Guide - Page 34

If you are using the camera for the first time, read this section. Setting the Date and Time When the power is turned on for the first time, the date/time setting screen appears. 1 Press the ADJ./OK button !"#$ to set the year, month, date and time. • Change the value with !" and move the frame with #$. • You can cancel the setting by pressing the DISP. Button. 2 In [Format], choose the date and time format. • Select the date and time format with !". 3 Check the display and then press the ADJ./OK button. • The date is set. Date Settings Date 2008 01 01 Time 00 00 Format Y/M/D hh:mm 2008/01/01 00:00 Cancel Ok Setting at shipping Date Settings Date 2008 01 01 Time 00 00 Format Y/M/D hh:mm 2008/01/01 00:00 Cancel Ok Note • If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again. • To retain the date and time settings, load a battery with adequate remaining power for more than two hours. • The set date and time can be changed later. (GP.181) • The date and time can be inserted into images. (GP.108) 32