Ricoh Aficio MP 2000 Copy Reference - Page 72

Appendix ❖ Duplex (Type 2 only) • The following paper sizes and orientations can be duplexed. A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 11" × 17"L, 81/2" × 14"L, 81/2" × 13"L, 81/2" × 11"KL, 81/4" × 14"L, 81/4" × 13"L, 8" × 13"L, 71/4" × 101/2"KL, 8KL, 16KKL • You cannot use the following paper with this function: • Paper smaller than A5 (71/4" × 101/2") • Paper thicker than 90 g/m2 (24 lb.) • Paper thinner than 64 g/m2 (17 lb.) 3 • Translucent paper • Label paper (adhesive labels) • OHP transparencies • Thick paper • Envelopes • When an odd number of originals is placed in the ADF or ARDF, the back of the last page of copied paper is blank. • During copying, the image is shifted to allow for the binding margin. ❖ Combine • In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on paper size and the number of originals. • The reproduction ratios selectable by the machine are 50-200 %. • If the calculated ratio is under the minimum ratio, it is automatically adjusted to within the available range. However, with some ratios, parts of the image might not be copied. • If the orientation of originals is different from that of the paper, the machine will automatically rotate the image by 90° to make copies properly. • If the number of originals placed is less than the number specified for combining, the last page segment is left blank as shown. ❖ Duplex Margin (Type 2 only) • If you set a binding margin that is too wide, parts of the image may not be copied. • When making copies using the Combine function, a binding margin is added to copies after the images are combined. 62