Ricoh Aficio MP 7500 S/P Scanner Reference - Page 47
Sending files to a NetWare server, Preparation for Sending by Scan to Folder
View all Ricoh Aficio MP 7500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Sending files to a NetWare server Before Sending Files by Scan to Folder 2 1. This machine You can send scan files to NetWare folders. To send scan files to NetWare folders, use the NCP protocol. 2. NetWare Server You can use this server to share files over the network via NetWare. By sending image data to the server, files can be stored on the server. ZZZ511S 3. Client computer To download files, a computer must be running the NetWare client and be logged onto the server. Preparation for Sending by Scan to Folder This section describes the preparations and settings for sending scan files by Scan to Folder. Important ❒ Files can be sent to shared folders on client computers. ❒ Files can also be sent to FTP servers if any exist on the network. Files can also be sent to FTP servers if any exist on the network. ❒ Files can also be sent to NetWare servers if any exist on the network. A Connect the machine to the network. Connect the machine to the network using an Ethernet or IEEE 1394 cable, or wireless LAN (IEEE 802.11b). B Make the necessary network settings in [System Settings]. If you have connected the machine to the network using an Ethernet cable, make the following settings. For details, see General Settings Guide. • Specify the machine's IPv4 address and subnet mask. • Specify the IPv4 gateway address. 39