Roku HD110 User Guide - Page 108
Configuring BrightSign using DHCP, Using a manual IP configuration, Software Downloads
View all Roku HD110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Configuring BrightSign using DHCP To connect the BrightSign to your network: 1 Use an ethernet cable to connect your BrightSign to your network. 2 Insert your CF/SD card with your content and playlist into your BrightSign and add power. BrightSign automatically requests an IP address from your network when it boots. Using a manual IP configuration If you do not want to use DHCP or you can't because of your network setup, you can manually set the IP address on BrightSign in one of two ways: • Configure BrightSign from the system shell, by connecting the BrightSign to your computer using a serial cable. • Use a manual IP configuration script. We recommend the manual IP configuration script method because it is easier than using the system shell. You can download a manual IP configurations script from the BrightSign website. Follow these steps to manually configure your IP settings: 1 Go to www.brightsign.biz/support and click the Software Downloads link. 2 Download and unzip the MANUAL_IP_CONFIGURATION.ZIP file, which contains an AUTORUN.BRS file. 3 Open AUTORUN.BRS with notepad or any text editor. 4 Edit AUTORUN.BRS to match the network settings on your network. 5 Copy AUTORUN.BRS to your CF/SD card. 6 Insert your CF/SD card into your BrightSign and add power. 7 When the option to press the video select button to choose DHCP appears, do not press the video select button. Wait 8 seconds, and BrightSign accepts the manual settings in your AUTORUN.BRS file. 102 • •