Samsung HT-TXQ120 Quick Guide (easy Manual) (ver.1.0) (English) - Page 26

Settings (Con't) Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. MOVE ENTER RETURN EXIT 1 In Stop mode, press the MENU button. 2 Press the Cursor button to move to and then press the ENTER button. 3 Press the Cursor button to move to and then press the ENTER button. 4 Press the Cursor , , , button to move to the desired speaker and then press the ENTER button. 5 Press the Cursor , button to set the Delay time. You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC. MOVE ENTER RETURN EXIT Press the RETURN button to return to the previous level. Press the MENU button to exit the setup screen. Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers. Ideal CENTER SPEAKER placement Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0 inch 13.6 inches 27.2 inches 40.8inches 4.5 feet 5.6feet Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Ideal SURROUND SPEAKER placement It is desirable to place all speakers within this circle. Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0 inch 40.8 inches 6.7 feet 10.0 feet 13.4 feet 16.7 feet Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms • With (Dolby Pro Logic II), the delay time may be different for each mode. • With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. • The Center channel is only adjustable on 5.1 channel discs. ENG Setting the Test Tone Use the Test Tone feature to check the speaker connections. MOVE ENTER RETURN EXIT 1 In Stop mode, press the MENU button. 2 Press the Cursor button to move to and then press the ENTER button. 3 Press the Cursor button to move to and then press the ENTER button. The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order. If the ENTER button is pressed again at this time, the test tone will stop. ENTER EXIT Press the RETURN button to return to the previous level. Press the MENU button to exit the setup screen. SETUP 50 51