Samsung LN32A620A1F User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 121

Hotel function Viewing the Clone Remote Control ➣ This function is only available when the TV is installed in a hotel. ➣ The Clone Remote Control is only for use in Hotel installations and is not included with the Accessories. A Remote control which instantly sets up TV settings to predefined values. Setting Mode  Picture mode  Picture size  Channel name  Tune Frequency  Hotel service mode: Interactive Hotel TV Hotel mode: Retail TV Buttons, Indicators and Connections 1 P ress "Power" button Television Power is On 2 P ress "Hotel TV" button Interactive TV: Enter Interactive Hotel TV Option Hotel Mode TV: Enter Hotel Mode Option 3 Press "TV" button to enter TV MENU. 4 Control the cursor in the menu 5 Receiving the data from TV or PC. 6 P ress Clock Setting - Enter clock set up menu - Change clock data with Up/Down/Left/Right buttons 7 C ommunication Status Indicators - TX: Indicates that the Clone Remote Control is sending data to the TV. (If the Send button is pressed, the TX Indicator will blink.) - RX: Indicates that the TV is sending data to the Clone Remote Control. (If the Receive button is pressed, the RX Indicator will blink.) 8 B attery Indicator notifies remaining battery charge - Red: Battery Low - Green : Battery Middle - Blue: Battery Full ➣ The battery needs to be charged when the indicator blinks red. 9 Return 0 Send ! P ress Lock/Unlock - Front(side) panel buttons and IR receiving(except lock/unlock button) is non-available or available. @ Connect TV with Clone remote control via RS-232C Cable # Remote IR out $ Charger connector English - 119