Samsung LN32A620A1F User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 15

Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV. VCR Rear Panel TV Rear Panel TV Side Panel 2. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV. ➣ If you have a "mono" 2 Audio Cable (Not supplied) (non-stereo) VCR, use a Y-connector 1 Video Cable (Not supplied) (not supplied) to connect to the right and left audio input jacks of the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Alternatively, connect ➣ Each VCR has a different back panel configuration. the cable to the "R" ➣ When connecting a VCR, match the color of the connection terminal to the cable. jack. If your VCR is stereo, you must connect two cables. ➣ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). S-Video Connection Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared to a standard VCR.) 1. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV. 2. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV. VCR Rear Panel 1 S-Video Cable (Not supplied) TV Side Panel 2 Audio Cable (Not supplied) An S-Video cable may be included with a VCR. (If not, check your local electronics store.) ➣ Each VCR has a different back panel configuration. ➣ When connecting a VCR, match the color of the connection terminal to the cable. English - 13