Samsung NP-Q1 Quick Guide (easy Manual) (ver.1.0) (English) - Page 186
When connecting to a computer-to-computer Ad Hoc network, I cannot, sometimes I cannot
View all Samsung NP-Q1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Q When connecting to a computer-to-computer (Ad Hoc) network, I cannot connect to another computer on the same computer-to-computer network. A1 Make sure that the security settings and network name of the computer-to-computer (Ad Hoc) network are correct. A2 Check the TCP/IP properties of the computers to be connected through the computer-to-computer (Ad Hoc) network. All computers to be connected through the computer-to-computer (Ad Hoc) network should be configured so that their IP addresses are within the same subnet range. ● If the TCP/IP Settings are configured to DHCP, the address is automatically configured to an address within the subnet IP range. This will take about 2~3 minutes. ● If the IP address is configured to a static IP in the TCP/IP properties, select Use the following IP address in the TCP/IP properties of the wireless adapter, configure an IP address between 10.0.0.1~10.0.0.254, and a Subnet mask of 255.255.255.0, and try again. ● A fixed IP is recommended for a small-sized network. ● If you are using a DHCP IP address, the system boot time may be extended. Q When using a computer-to-computer (Ad Hoc) network, sometimes I cannot search the access point. A It may happen occasionally when you are using a computer-to-computer (Ad Hoc) network connection. Even if you cannot find some access points, the computer-tocomputer (Ad Hoc) network is operating properly. Click Refresh to view the latest search result. 186