Samsung PN42B400P3DXZA User Manual - Page 24
Picture, ResetPictureMode, Cancel
View all Samsung PN42B400P3DXZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Screen Burn Protection Configures the Screen Burn Protection options to prevent and reduce pixel burn. When an image remains in one position too long, it may cause a permanent burn on the screen. Preventing Screen Burn=in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. • Pixe! Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after- images on the screen. Optimum condition for pixel shift; Horizontal 0--4 2 0_4 2 1~4 rain. 2 min. Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light. - Dark: When you set the screen ratio to 4:3, it darkens the left and right sides. - Light: When you set the screen ratio to 4:3, it brightens the left and right sides. Reducing the Effects of Screen Burn If screen burn has occurred, you can select scrolling to help remove screen burn artifacts. • Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. The after-image removal function has to be executed for a long time (approximately I hour) to effectively remove afterimages on the screen. If the after-image is not removed after performing the function, repeat the function again. Press any key on the remote control to cancel this feature. [] PictureReset _ ResetPictureMode / Cancel Resets all picture settings to the default values, Select a picture mode to be reset. The reset is performed for each picture mode.