Samsung PN58A550S1F User Manual (ENGLISH) - Page 69

Upgrading the Software Samsung may offer upgrades for your TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the side of the TV. ➢ Software can not be upgraded through the LAN connection. TV side Panel ($-)). 2 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 3 Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button. Setup USB Drive Energy Saving : Off PIP SW Upgrade ► 4 The message Scanning for USB... It may take up to 30 seconds. is displayed. Software Upgrade Scanning for USB..... It may take up to 30 seconds. 5 If the firmware on the USB is properly recognized, the message Upgrade version xxxx to version xxxx? The system would be reset after upgrade. is displayed. Press the ◄ or ► button to select OK, then press the ENTER button. The upgrade starts. Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied. The TV will shut off and turn on automatically after completing the firmware upgrade. ➢ When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. Software Upgrade Upgrade version XXXX to version XXXX ? The system would be reset after upgrade. OK Cancel English - 69