Samsung SCX-4300 User Manual (ENGLISH) - Page 22
Setting up the machine system, Overview of control panel menus, Changing the display language - cartridge
UPC - 635753611021
View all Samsung SCX-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting up the machine system Overview of control panel menus The control panel provides access to various menus to set up the machine or use the machine's functions. They can be accessed by pressing Menu. Refer to the following diagram. Reduce/Enlarge Darkness Original Type Special Copy Off Clone Auto Fit ID Card Copy 2 UP Poster Toner Save Paper Setting Paper Size Paper Type Copy Setup Default-Change Timeout Report Machine Setup Language Power Save USB mode Maintenance Clean Drum Clear Settings Changing the display language To change the language that appears on the control panel, follow these steps: 1 Press Menu until Machine Setup appears on the top line of the display. 2 Press OK when Language appears. 3 Press the scroll button ( or ) to select the language you want and press OK. 4 Press Stop/Clear to return to Standby mode. Using the save modes Toner save mode Toner save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces print quality. 1 Press Menu until Toner Save appears on the top line of the display. 2 Press the scroll button ( or ) until On appears and press OK. NOTE: When PC-printing, you can also turn on or off Toner Save mode in the printer properties. See the Software Section. Power save mode Power save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state. 1 Press Menu until Machine Setup appears on the top line of the display. 2 Press the scroll button ( or ) until Power Save appears and press OK. 3 Press the scroll button ( or ) until On appears and press OK. 4 Press the scroll button ( or ) to select the time setting you want and press OK. 5 Press Stop/Clear to return to Standby mode. 2.6 Getting started