Samsung SCX-4300 User Manual (ENGLISH) - Page 44
In the fuser area or around the toner cartridge, In the paper exit area
UPC - 635753611021
View all Samsung SCX-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
In the fuser area or around the toner cartridge NOTE: The fuser area is hot. Take care when removing paper from the machine. 1 Open the front cover and pull the toner cartridge out. In the paper exit area 1 Open and close the front cover. The jammed paper automatically exits the machine. If the paper does not exit, continue to step 2. 2 Gently pull the paper out of the output tray. Skip to step 9. 2 Remove the jammed paper by gently pulling it straight out. 3 Replace the toner cartridge and close the front cover. Printing automatically resumes. If you cannot see the jammed paper in the output tray, continue to the next step. 3 Lift the scan unit. 4 Pull the jammed paper out gently. 5 Close the scan unit by pushing a tab to the left and hold it down and lowering the cover carefully until the cover is holding down the tab. If there is any resistance and the paper does not move when you pull or if you cannot see the paper under the scan unit, continue to the next step. 6 Open the rear cover. 7 Remove the jammed paper by gently pulling it straight out. 8 Close the rear cover. 9 Open and close the front cover to resume printing. 9.2 Troubleshooting