Samsung SRD-1670DC User Manual - Page 16
loose from vibration.
View all Samsung SRD-1670DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
installation 1. First, loosen the screws on both sides and remove the cover. 2. Disconnect the power and HDD Signal cable from the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper brackets. 3. Install a HDD (x1) on the lower bracket and fix it with screws. Firmly secure the screw so that it does not become loose from vibration. 4. Install HDDs (x3) on the upper bracket and fix them with screws. 5. When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fix them with the provided screws. Cover Upper Bracket Lower Bracket Upper Bracket Lower Bracket 16_ installation
16_
installation
installation
First, loosen the screws on both sides and remove
the cover.
Disconnect the power and HDD Signal cable from
the existing HDDs, then loosen the screws (x4) in
the left/right and upper sides and remove the upper
brackets.
Install a HDD (x1) on the lower bracket and fix it
with screws.
Firmly secure the screw so that it does not become
loose from vibration.
Install HDDs (x3) on the upper bracket and fix them
with screws.
When the installation of additional HDDs is done,
insert the lower and upper brackets into the DVR
and fix them with the provided screws.
1.
2.
3.
4.
5.
Upper Bracket
Lower Bracket
Cover
Upper Bracket
Lower
Bracket