Samsung SRD-1670DC User Manual - Page 61

Connecting and Setting the Network

Page 61 highlights

 USING THE DVR DDNS You can set the DDNS site for a remote user's network connection. Using the mouse may help make setup easier. 3. Use the up/down buttons () in window to move to , and press [ENTER] button. 4. Use virtual keyboard to enter user inputs.  Refer to "Using Virtual Keyboard". (Page 36) DDNS x DDNS Site x Host Name x User Name x User Password OFF ********  If selected or , input fields are deactivated. 5. When the DDNS setup is done, press . M  Refer to . (Page 63) OK Cancel Connecting and Setting the Network Networking may differ from the connection method, check your environment before setting the connection mode. When no router is used • Static IP mode - Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the DVR and remote user. - DVR Network Settings : Set the in menu of the connected DVR to .  Consult your network manager for IP, Gateway and Subnet Mask. Connection Mode Connection Protocol x Connection Mode x Bandwidth Static IP 2Mbps x IP x Gateway x Subnet Mask x DNS 192.168. 1.200 192.168. 1. 1 255.255.255. 0 Manual 168.126. 63. 1 OK Cancel • Dynamic IP (DHCP) mode - Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network. - DVR Network Settings : Set the in menu of the connected DVR to . • ADSL (PPPoE: ID and password certification) - Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection requires user ID and password. - DVR Network Settings : Set the in menu of the connected DVR to .  ADSL and should be the same to the ADSL user information. If you don't know the ID and password, consult your ADSL service provider. Connection Mode Connection Protocol x Connection Mode x Bandwidth ADSL 600kbps x IP x Gateway x Subnet Mask x DNS 192.168. 1.200 192.168. 1. 1 255.255.255. 0 Manual 168.126. 63. 1 x User ID x Password ID ******** OK Cancel English _61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

English
_61
USING THE DVR
DDNS
You can set the DDNS site for a remote user’s network connection.
Using the mouse may help make setup easier.
Use the up/down buttons (
±²
) in <
Network
> window to
move to <
DDNS
>, and press [
ENTER
] button.
Use virtual keyboard to enter user inputs.
Refer to “
Using Virtual Keyboard
”. (Page 36)
If selected <
OFF
> or <
Samsung DDNS
>, input fields are
deactivated.
When the DDNS setup is done, press <
OK
>.
Refer to <
DDNS Setting
>. (Page 63)
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection
mode.
When no router is used
Static IP mode
-
Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the
DVR and remote user.
-
DVR Network Settings : Set the <
Connection Mode
> in
<
Connection
> menu of the connected DVR to <
Static IP
>.
Consult your network manager for IP, Gateway and Subnet Mask.
Dynamic IP (DHCP) mode
-
Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network.
-
DVR Network Settings : Set the <
Connection Mode
> in <
Connection
> menu of the connected DVR to
<
Dynamic IP
>.
ADSL (PPPoE: ID and password certification)
-
Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection
requires user ID and password.
-
DVR Network Settings : Set the <
Connection Mode
> in
<
Connection
> menu of the connected DVR to <
ADSL
>.
ADSL <
User ID
> and <
Password
> should be the same to the
ADSL user information.
If you don’t know the ID and password, consult your ADSL service
provider.
3.
4.
5.
M
OK
Cancel
DDNS
DDNS Site
OFF
Host Name
User Name
User Password
********
Connection Mode
Connection
Protocol
Connection Mode
Static IP
Bandwidth
2Mbps
OK
Cancel
IP
192.168.
1.200
Gateway
192.168.
1.
1
Subnet Mask
255.255.255.
0
DNS
Manual
168.126.
63.
1
Connection Mode
Connection
Protocol
Connection Mode
ADSL
Bandwidth
600kbps
OK
Cancel
IP
192.168.
1.200
Gateway
192.168.
1.
1
Subnet Mask
255.255.255.
0
DNS
Manual
168.126.
63.
1
User ID
ID
Password
********