Samsung U32D970Q User Manual - Page 91
Standard Signal Mode Table
View all Samsung U32D970Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Standard Signal Mode Table -- This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. Model Name Synchronization Horizontal Frequency Vertical Frequency Resolution Optimum resolution Maximum resolution U32D970 30 - 81 kHz 56 - 75 Hz DisplayPort1 / DisplayPort2: 3840 x 2160 @ 60 Hz HDMI / DVI: 3840 x 2160 @ 30 Hz DisplayPort1 / DisplayPort2: 3840 x 2160 @ 60 Hz HDMI / DVI: 3840 x 2160 @ 30 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. Resolution Horizontal Frequency Vertical Frequency (Hz) Pixel Clock (MHz) (kHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- VESA, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ 91