Samsung XE700T1C User Manual Windows 8 User Manual Ver.1.1 (English) - Page 75
Installing the TPM program, Set the TPM State
View all Samsung XE700T1C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Using the TPM Security Device (Optional) Chapter 3. Using the computer 74 4 Select Save to save the changes. 검색 5 If the system automatically restarts and th공e유 Samsung logo screen appears, press the Home button several times. 시작 6 Select Security > TPM Configuration and set the TPM Device item to Enabled. 장치 Set the TPM State to Enable & Activate. 설정 TPM Device TPM State Security Chip State Enabled Clear Enabled & Activate Clear Enabled & Activate Deactivate & Disable Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc. Installing the TPM program You can install the TPM program as follows. Install the program according to the procedures below. This program is only provided for models with Recovery and the TPM function. 1 When the computer is off, press the Power button while holding down the Volume (+) button. Select Recovery to enter software recovery mode. 2 Select System Software. If the message box appears, click Yes. The computer boots up in Windows. 3 If you move to the Desktop screen, the SW Update program runs. Select TPM Host SW and click Install Now. 7 Select Save to save the changes. 8 The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program. If the system software media is supplied with the product, you can install the program by using the system software media (only when supplied.) 4 After the installation, if you click OK, the computer restarts.