Sanyo AWM-2800 Instruction Manual - Page 15
&oro, Preset
View all Sanyo AWM-2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
LISTENING TO PRESET STATIONS Program stations as described in "TO PRESET STATIONS". Using [PRESET] &Oro sr 2 2, ao O • TUNING/TIME SET. DISC CHANGE 0 0 0 2 BAND REPEAT Changing the reception frequencies If necessary, use the following procedure to change the reception frequencies. 1. Select the band to be changed. 2. While pressing [CLEAR • ] on the front panel, press [ [SOUND PRESET] on the front panel at the same time. ] and AM: 520 - 1710 kHz (10 kHz steps) 522 - 1710 kHz (9 kHz steps) FM: 87.9 - 107.9 MHz (200 kHz steps) 87.5 - 108.0 MHz (50 kHz steps) NOTES: • "ST" appears when an FM stereo broadcast is received. If not, press [FM MODE] to turn the "ST" indication on. • If the signal from an FM stereo station is weak and reception is poor, press [FM MODE] to change to monaural reception. 1. Press [BAND] to select AM or FM. BAND 2. Press [PRESET] A or V (or [PRESET] + or - on the remote control) to select the desired program number. PRESET • The number buttons on the remote control can also be used. -E14-