Sanyo ICR-EH800D ICR-EH800D Instruction Manual - Page 125
Before contacting your local dealer
UPC - 086483074950
View all Sanyo ICR-EH800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Before contacting your local dealer Try the following solutions. If the problem still persists, contact your local dealer for assistance. The unit does not start. Cause Solution Battery is not inserted properly or is low. Check to make sure the battery is inserted correctly. Remove the battery completely and then insert it back into the unit again, or replace with a new alkaline battery. See "Inserting the battery" on page 21. Buttons or switches do not respond. Cause Solution The Hold function to prevent accidentally pressing a button is turned on. Turn off the Hold function. See "Preventing accidentally pressing a button (hold function)" on page 24. Cause Solution The USB terminal of the unit is still connected to your PC. Disconnect the unit from your PC. See "Disconnecting your PC" on page 117. The microSD card is not recognized by the unit. Cause Solution The microSD card is not inserted correctly. Turn off the power of the unit, and then insert the microSD card again. Cause Solution The microSD card has been formatted by another device (e.g. PC) instead of the unit. Use the unit to format the microSD card again. See "Formatting the internal memory or a microSD card" on page 79. 125