Sanyo ICR-EH800D ICR-EH800D Instruction Manual - Page 134

Recording frequency (During external microphone recording) (During built-in microphone recording) Format Playback format Playback frequency Sampling frequency Playback bitrate Input/output sockets Operating temperature Rated output (headphones) Power source Battery duration (Recording time) (Playback time/ stereo earphones) : 40 to 21,000Hz (for PCM 44.1kHz 16bit) 40 to 20,000Hz (for MP3 320kbps) 40 to 20,000Hz (for MP3 192kbps) 40 to 15,000Hz (for MP3 128kbps) 40 to 7,500Hz (for MP3 64kbps) 40 to 6,500Hz (for MP3 32kbps) : 60 to 20,000Hz (for PCM recording) * The frequency upper limit of MP3 recording follows each recording mode of external microphone recording. Also, the lower limit for each recording mode is 60 Hz. : MP3, PCM (WAV) : MP3 (MPEG1 LAYER3, MPEG2 LAYER3, MPEG2.5 LAYER3), WMA, PCM (only files recoded on the unit) : 20 to 21,000Hz (for 44.1kHz sampling frequency) : 16 to 44.1 kHz : 16 to 320 kbps (MP3) 32 to 192 kbps (WMA) * Depending on the file, normal playback may not be possible. : USB, stereo headphones mini-plug 3.5 I, stereo microphone (doubling as line input) mini-plug 3.5 I, microSD card slot : +5°C to +35°C : 10mW + 10mW (when 16: load, JEITA/DC) : AAA alkaline battery u 1 : [MP3] 64 kbps Approx. 26 hours (alkaline battery) Stereo mode Approx. 19 hours (eneloop battery) [PCM] 44.1 kHz 16bit Approx. 10 hours (alkaline battery) Approx. 9 hours (eneloop battery) (Recording environment: Recording LED off, backlight off, no recording monitor, MIC ALC ON) : [MP3] 64 kbps Approx. 23 hours (alkaline battery) Stereo mode Approx. 18 hours (eneloop battery) [PCM] 44.1 kHz 16bit Approx. 11 hours (alkaline battery) Approx. 10 hours (eneloop battery) (Playback environment: Stereo Earphones playback, backlight off, SOUND EQ = FLAT) 134