Sanyo ICR-EH800D ICR-EH800D Instruction Manual - Page 32
About the external recording mode external input/microphone
UPC - 086483074950
View all Sanyo ICR-EH800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
About the external recording mode (external input/microphone) For external input, you can use the LINE/MIC switch on the unit to set to LINE or MIC. To use an external microphone Slide the LINE/MIC switch to MIC. The external recording mode is set to MIC and the screen displays "MIC". Connect the external input (line)/microphone socket with a stereo microphone (sold separately) for recording. When purchasing an external microphone, make sure the microphone meets the following recommended specification. .*$JOEJDBUPS " 44%% .*$ 45 .1 L " NT 3&$3&."*/5*.& INT '-"5 Recommended specification: • Type: Electret condenser/plug-in power system • Impedance: 2 k : • Power: Guaranteed to operate at 1.3 V • Plug: Mini-plug (3.5 I) If you set the "MIC MODE" setting to "ZOOM" and then use an external microphone for recording, mono* recording will result. * If PCM recording is used, the same sound is recorded on both L and R channels in stereo format. To connect to other audio devices Slide the LINE/MIC switch to LINE. The external recording mode is set to LINE and the screen displays "LINE". • Recorded files are automatically stored in the LINE (L) folder. -*/&JOEJDBUPS " 4% -*/& 45 .1 L " NT 3&$3&."*/5*.& INT '-"5 32