Sanyo ICR-EH800D ICR-EH800D Instruction Manual - Page 45
Slide the LINE/MIC switch to LINE. - test
UPC - 086483074950
View all Sanyo ICR-EH800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2 Turn on the power. Turning on the power (page 22) 3 Slide the LINE/MIC switch to LINE. Changing the recording mode (page 87) 4 Start playing the external sound source, and press the REC button on the unit to start recording. • The recording will be stored in the LINE (L) folder. • For recording from external input, the recording level on the unit cannot be adjusted. • Before the real recording, first test it so that you can adjust the external device for desired quality. If the sound volume is too high, cracking sound will occur. 5 To stop recording, press the STOP/BACK button. Also, stop playback on the external device. • If the sound volume on the external device has already been set to its maximum but yet the sound in line-in recording is small, slide the LINE/MIC switch to MIC and adjust the recording level, then perform recording again. In this case, recording will be saved in the selected microphone folder (A to D). ( page 17) 45