Sanyo ICR-EH800D ICR-EH800D Instruction Manual - Page 23

Remaining battery power You can check the remaining battery power from the screen. When appears, replace as soon as possible with a new battery. #BUUFSZ
QPXFS • When the battery is low, "LOW BATTERY PLEASE CHANGE THE -BSHF 4NBMM BATTERY" appears and then the screen goes off. • When the battery is low, if the "BEEP SOUND" setting is set to "ON", you can hear a beep sound. • Depending on the ambient temperature and usage, the battery duration may change. Therefore, take the battery indicator as a rough guide. " 4% .*$ 45 .1 
L "  NT 3&$

3&."*/

5*.&  INT '-"5 • Once the alkaline battery is low, do not continue to use the alkaline battery. For an eneloop battery, recharge it sufficiently before using it again. Resume function The resume function remembers file used and playback position before the power was turned off last time. When you turn on the power again, the unit resumes with these settings. However, the resume function does not work in the following cases. - If you switch the folder - If the unit is connected to your PC - If you remove the battery or a microSD card without turning off the power first - If you switch between the internal memory and a microSD card 23