Sanyo ICR-EH800D ICR-EH800D Instruction Manual - Page 42

7 Press the / button to select a recording EQ mode, and then press the /OK button. The selected recording EQ is set and the recording menu screen returns. You can select one of the seven preset recording EQ modes, or the user-defined USER mode to create your own favorite recording EQ mode. • If you select USER, see "Setting your favorite recording EQ mode (only when USER is selected)" ( page 42) and set your favorite recording EQ mode. 8 Press the MENU/PLAY LIST button. The recording standby screen returns. • After adjusting the recording level, press the REC button again to start recording. • While setting a recording EQ mode, you can press the STOP/BACK button to cancel the operation and return to the previous state. " 4% .*$ 45 '-"5 " 4% .*$ 45 11$$.. ,  " 45"/%#:  INT • The recording EQ setting is not lost when you turn off the power, or when you turn off the power and replace the battery power. However, if you replace the battery without first turning off the power, the setting will be lost. Setting your favorite recording EQ mode (only when USER is selected) When you select USER as the recording EQ mode, you can customize this mode by changing each of the five bands of the recording EQ mode. 1 42 Change the recording EQ mode to "USER". Selecting a preset recording EQ mode (page 41)