Sanyo PLC-XK2600 RS232 Expand - Page 18
Image Command, CF_BRIGHT Command, CF_CONT Command, CF_COLOR Command, CF_TINT Command
UPC - 086483079504
View all Sanyo PLC-XK2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PLC-XK2200 /2600 /XK3010 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_%1"[CR] "000~063 Directly select Brightness setting value %1 "UP Current Brightness setting value + 1 "DN Current Brightness setting value - 1 Details Set Brightness value of user control Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.2 CF_CONT Command Command "CF_CONT_ 1"[CR] "000~063 Directly select Contrast setting value %1 "UP Current Contrast setting value + 1 "DN Current Contrast setting value - 1 Details Set Contrast value of user control Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.3 CF_COLOR Command Command "CF_COLOR_%1"[CR] "000~063 Directly select Color setting value %1 "UP Current Color setting value + 1 "DN Current Color setting value - 1 Details Set Color value of user control Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.4 CF_TINT Command Command "CF_TINT_%1"[CR] "000~063 Directly select Tint setting value %1 "UP Current Tint setting value + 1 "DN Current Tint setting value - 1 Details Set Tint value of user control Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 18 / 73