Sanyo PLC-XK2600 RS232 Expand - Page 24

PLC-XK2200 /2600 /XK3010 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] "0000~nnnn" --- Directly select Horizontal Position setting value %1 "nnnn" shows maximum value, it is current Total Dots value - Display Dots value "UP Current Horizontal Position setting value + 1 "DN Current Horizontal Position setting value - 1 Details Set Horizontal Position value of PC signal. Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.5.5 CF_V - POS Command Command "CF_V-POS_%1"[CR] "0000~nnnn" --- Directly select Vertical Position setting value %1 "nnnn" shows maximum value, it is current Total Line value - Display Line value "UP Current Vertical Position setting value + 1 "DN Current Vertical Position setting value - 1 Details Set Vertical Position value of PC signal Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.5.6 CF_DDOTS Command Command "CF_DDOTS_%1"[CR] "0256"~"nnnn" --- Directly select Display Dots setting value "nnnn" shows maximum value, it is current Total Dots value - Horizontal %1 Position value Even number is available and when odd number is set, it is rounded out. "UP Current Display Dots setting value + 2 "DN Current Display Dots setting value - 2 Details Set Display Dots value of PC signal Projector does not save the value set with this command so that it resets when projector turning into Standby status or ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 24 / 73