Sanyo PLC-XK2600 RS232 Expand - Page 22
CF_COLBOARD Command, 4.14 CF_IMAGEADJ Command
UPC - 086483079504
View all Sanyo PLC-XK2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
PLC-XK2200 /2600 /XK3010 Expand Serial Command Functional Specifications 8.4.13 CF_COLBOARD Command Command "CF_COLBOARD_%1"[CR] "RED Select Red %1 "BLUE Select Blue "YELLOW" ------- Select Yellow "GREEN" --------- Select Green Details Select Color of Colorboard mode. Image mode is automatically switched to Colorboard mode by receiving this command. The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.14 CF_IMAGEADJ Command Command "CF_IMAGEADJ_%1"[CR] "RST" ------- Reset Image adjustment "STR1" ----- Store current Image adjustment to Image 1 %1 "STR2" ----- Store current Image adjustment to Image 2 "STR3" ----- Store current Image adjustment to Image 3 "STR4" ----- Store current Image adjustment to Image 4 Details Reset / store Image adjustment. Parameter "STR1" to "STR4" is the same as "Image1" to "Image4" displayed when adjusting Image on OSD menu and selecting "Store" The value stored to "Image1-4" is saved and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 22 / 73