Sanyo PLC-XK2600 RS232 Expand - Page 30

PLC-XK2200 /2600 /XK3010 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1"[CR] "NORMAL Select Normal mode "FULL Select Full screen mode "WIDE Select Wide (16:9) mode "ZOOM Select Zoom mode "TRUE Select True mode Input is "CUSTOM Select Custom mode Computer "DZOOM_UP Expand image size with Digital Zoom "DZOOM_DN Reduce image size with Digital Zoom "UP The same operation as pressing Up key or Left key "DN The same operation as pressing %1 Down key or Right key "NORMAL Select Normal mode "FULL Select Full screen mode "WIDE Select Wide (16:9) mode Input is Video "ZOOM Select Zoom mode "CUSTOM Select Custom mode "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN" start effecting from the first command. This command is available in normal Power ON status. Response Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered, the signal recognized as Video Input. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.7.2 CF_DZCENT Command Command "CF_DZCENT_%1"[CR] %1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER") Details Cancel Digital Zoom When image is expanded or shrunk, reset its value. This command is available in normal Power ON status and when Input is Computer. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 30 / 73